Shark Buck a step down converter. The Shark Buck is the same diameter (0.75") as the Shark and Blue Shark. It has the same trim pot and trim pot functionality. Remora can be mounted on the Shark Buck and behave the same as the regular Shark. It will be a little taller.
**Assembled with a Remora board. ** Scroll all the way down the page. Check the box. Add to cart. You can change quantity in the box. Hit Update.
The Shark Buck has reverse battery protection and accommodates the same copper C as on the regular Shark for optimum thermal transfer to the heat sink.
To thermally bond Blue Shark or Shark Buck to a heat sink, use a super thin (paper thin or thinner) layer of thermal glue.
When mounting a Blue Shark, Shark Buck etc to the heat sink use an ultra-thin layer of adhesive for maximum conductivity. Too thick of a layer is like creating an air gap.
For proper mounting the converter board should be clamped. Thermal interface to heat sink must be less than 15C/W.
There are two sense resistors on this board making it easier to generate a valid output current combination.
One 0.1 ohm resistor = 1A max. (default)
Two 0.1 ohm resistors = 2A max.
One 0.1 ohm, one 0.05 ohm = 3A max. (maximum output configuration)
Make sure to choose an output value and confirm it shows up on your order.
NEW: Scroll all the way down the page. Put a number in the box. Hit Update.