|
The CreeBar is an extruded aluminum fixture capable of housing a Xitanium driver and LEDs either in a solid MCPCB strip or discretely. One side has three 10-24 threaded screw holes for use on tripod mounts or similar mounting attachments. This is the heatsink only. The front lens, back plastic plate and end plates are sold separately. See drawing below for more information.
Dimensions: L 7" W 3" H 2.5"
The Makita Dock can be mounted to the CreeBar allowing a fixed light to be made for use with the Makita LXT series batteries.
A CreeBar will not fit in a Small Flat Rate box. No Small Priority International either.
Choose Priority Mail Medium Flat Rate or Priority Mail, Express Mail and the same for International mailing for the CreeBar. 8" x 4" x 4" container for a single
See photo below:
Top half - Dimension for Converter board side Bottom 1.5" Side Depth 1.25" 0.5" to 1st groove, 0.75" to 2nd groove
Below half - Inside trough dimension for LEDs Bottom 1.5" Side Depth 1.25" 1.0" to groove
Use a Shark Buck step-down converter to drive the multi-LED light.
CreeBar Thread
Add Ons:
CreeBar Kit
Cree strip x6
Cree McR_-XR reflectors
Cree LED
MCPET Cutout
Rebel strip x6
Rebel LED |
